*
News: SMF - Just Installed!


Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length

add feature on demande to switch EN2092 1928

Super Newbie Posts: 17 Karma: +0/-0 *
add feature on demande to switch EN2092
« on: July 03, 2015, 01:12:58 PM »
I have activation key for additional options for EN2092 switch.
but I can not load into the switch the key to activate the procedure is quite complicated.

thank you for your help
Administrator Sr. Member Posts: 309 Karma: +6/-0 *****
Re: add feature on demande to switch EN2092
« Reply #1 on: July 06, 2015, 09:11:51 AM »
Hi Gatta,

Are you familiar with using TFTP or SFTP? You can download an easy to use client here from Solarwinds. http://download.cnet.com/SolarWinds-TFTP-Server/3000-18506_4-10974238.html

From the command line you have the same options as in the GUI so there's no other way to get the key to the switch. Make sure you have your license key file that you received from IBM placed in the root directory that you configure for your TFTP server. From there you just enter the information requested and then 'Install Key'.
Super Newbie Posts: 17 Karma: +0/-0 *
Re: add feature on demande to switch EN2092
« Reply #2 on: July 06, 2015, 10:06:28 AM »
Thanks for reply.
I installe it but i cant start the server. When i clic start  boton that goes stoped.

Regards
Administrator Sr. Member Posts: 309 Karma: +6/-0 *****
Re: add feature on demande to switch EN2092
« Reply #3 on: July 06, 2015, 11:16:33 AM »
Right-click on the TFTP server and try to run in compatibility mode for Windows XP.
Super Newbie Posts: 17 Karma: +0/-0 *
Re: add feature on demande to switch EN2092
« Reply #4 on: July 06, 2015, 12:14:12 PM »
it'is ok now

thanks very match

but now it about this field : Key or Inventory filename.

i put the name of the licence or the directory by i have a message "key file not found".

Best Regards 
« Last Edit: July 06, 2015, 12:47:09 PM by gatta »
Administrator Sr. Member Posts: 309 Karma: +6/-0 *****
Re: add feature on demande to switch EN2092
« Reply #5 on: July 06, 2015, 03:29:00 PM »
Do you see anything in the log window of the TFTP server when you try to connect? It should say establishing session with <your switch IP> and following messages about pulling down a file.

One thing to note. Make sure your key file is in the root of the TFTP directory and when you enter the filename into the switch GUI, make sure the filename includes the file extension and as long as the file is in your TFTP servers root directory you should only need to use the filename.
Super Newbie Posts: 17 Karma: +0/-0 *
Re: add feature on demande to switch EN2092
« Reply #6 on: July 07, 2015, 09:01:01 PM »
hello,
thank you for your help, i use with SFTP protocol.
it worked.
thank you