*
News: SMF - Just Installed!


Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length

Config SNMP to discover FC5022 SAN Switch task 2769

Super Newbie Posts: 37 Karma: +0/-0 *
Config SNMP to discover FC5022 SAN Switch task
« on: March 02, 2014, 11:59:40 PM »
Dear all,

Just for discussion. In the IBM website guide, there is a mention:
 
pic.dhe.ibm.com/infocenter/flexsys/information/topic/com.ibm.acc.8731.doc/setting_up_the_fc5022_16gb_san_switch.html

The SNMPv3 credential is typically configured automatically on the switch device by IBM? Flex System Manager management softwareversion 1.2 or later, using the default snmpadmin3 user account with SHA/DES authentication and privacy protocols, and default passwordadmin3.

Does SHA/DES is the requirement protocol to authenticate between FSM and SAN Switch?
Besides, for who have configure this one, does the switch has been automatically configured and unlocked by FSM after discovering? Because for my environment, i using IPv4 so i have to manually config this one in switch and FSM.

Administrator Sr. Member Posts: 309 Karma: +6/-0 *****
Re: Config SNMP to discover FC5022 SAN Switch task
« Reply #1 on: March 03, 2014, 04:58:04 PM »
Dongdp,

If you plan on using the SMIA tool then you would need to configure these protocols on the SAN switch itself as in this guide here.


http://pic.dhe.ibm.com/infocenter/flexsys/information/index.jsp?topic=%2Fcom.ibm.acc.8731.doc%2Fconfiguring_the_ibm_flex_system_fc5022_16gb_san_switch.html
Super Newbie Posts: 37 Karma: +0/-0 *
Re: Config SNMP to discover FC5022 SAN Switch task
« Reply #2 on: March 03, 2014, 08:37:12 PM »
Yep, it seem we have to both configure in ipv4 and ipv6. Because trap configure in SNMP in switch is ipv4 (0.0.0.0 format).
Administrator Sr. Member Posts: 309 Karma: +6/-0 *****
Re: Config SNMP to discover FC5022 SAN Switch task
« Reply #3 on: March 12, 2014, 05:47:24 PM »
Correct the trap would be the ipv4 of the fsm.
Guest

Michaelagot

*
Config SNMP to discover FC5022 SAN Switch task
« Reply #4 on: December 17, 2014, 07:53:14 PM »
All I want is "copy running-config startup-config"

So SWT01 and SWT02 in a stack will have the configuration saved and when I reboot the switch, no setting in SWT01 and SWT02 is lost.