Hello guys,

I want to define two default gateways on my EN2092. For exemple, 10.0.01 and 10.0.0.2 through one IP interface 10.0.0.3
How does it really works ?
Does it choose "by default" the first one ? And if the first one is not reachable, does it swhitch the traffic through the second ?

Thanks !

Cykani,

We are not as familiar with deeper networking concepts but after doing some reading it appears the only way you could do this is to define static routes and pick a gateway for each route. Otherwise the route through the gateway would be determine by the gateway defined in the header of each packet.

Check out this configuration menu below and let us know if that is what you're after. Also the link will get you to the OS guide for the EN2092.

http://pic.dhe.ibm.com/infocenter/flexsys/information/topic/com.ibm.acc.networkdevices.doc/88y7947.pdf

>> BNT - IP Routing# /cfg/l3/route
------------------------------------------------------------
[IP Static Route Menu]
     add       - Add static route
     rem       - Remove static route
     clear     - Clear static routes
     cur       - Display current static route configuration

Thanks!